 |
HONEYBEE GARDEN
Non Peel Off
Waterbased Nail Enamel
For
those who want an alternative to solvent-based nail
enamel, we've got the solution for you! Our unique
water-based polish is totally odor-free! No more nasty
fumes. But perhaps best of all, there's also no need for
toxic smelly nail polish remover - this product removes
with rubbing alcohol, vodka/grain alcohol or our new
Odorless Polish Remover! Thanks to our new patented
technology, there's nothing else like it on the market!
Special Features:
No FD&C
colors; only natural mineral pigments
Water-based, not solvent-based like traditional polish
Odor-free!
No more nasty fumes
Long
lasting and provides great coverage at a great price
Beautiful
trendy colors to match our ColorBalm Naturals Lipstick
Nothing
else like it on the market - totally unique
What Makes this Product
Different
You already know it's
water-based, it's odor-free and has no formaldehyde,
toluene, dibutyl phthalates or FD& C colors. But let's
take that a step further. Without getting too technical,
let's explore the fundamental differences between
solvent-based and water-based systems. Solvent- based
polishes are simple solutions of nitrocellulose resins
in strong solvents. Nitrocellulose is used because it
forms a very hard film easily as the solvents evaporate
from the base. These harsh, bad-smelling solvents, are
then also used to remove the polish by dissolving the
film. By contrast, water-based polish uses an emulsion
resin in the form of billions of very small particles
suspended in water. As the water evaporates, the
particles touch each other and form a hard film which is
no longer soluble in water. At first, it may seem that
these systems are similar, the only difference being the
carrier base. But they are in fact as different as night
and day. One cures by reversible solvent evaporation,
the other by creating a tightly knit film. One is easily
dissolved, the other not so easily. Several states are
beginning to regulate VOCs (volatile organic compounds)
emitted by nail polishes and nail polish removers.
WaterColors Nail Enamel has very low VOCs.
-
QUESTION: What kind of
acrylic acid is this?
ANSWER: There are many different kinds of
"acrylic acid" which is defined by the molecular
formula C3H4O2. Ours is an organic, odorless,
colorless blend that is non-toxic to both humans and
animals.
Product Appearance
You'll notice the Clear
Base/ Top Coat polish actually appears milky white in
the bottle. The milkiness disappears upon drying to form
a clear coat. Sometimes minor settling occurs in some
colors, and you may notice a light ring of color at the
top of the bottle, or some sparkle floating to the
bottom. We have shaker beads inside, so a light shake of
the polish easily re-disperses the pigment.
Nail preparation
Solvent-based polishes can strip healthy nails of
naturally produced oils. Since our polish does not
contain these solvents, the oils remain on the nail.
Wash and dry hands thoroughly before applying polish.
Those with very dry skin may wish to apply a cuticle oil
to nails first before applying polish to help hydrate
the nail. Make sure the oil is absorbed into the nail
before polishing.
Dry time
Dries to a tack-free state nearly as fast as regular
polish. Two thin coats will dry faster than one thick.
Cold hands, low temperatures and high humidity can
prolong drying time. Water resistant in about 15
minutes. Able to withstand other chemicals (shampooing,
doing dishes) after about an hour. For best results,
polish nails at the end of the day so they have
overnight to cure properly.
Product exceptions
You may find this product is a bit more difficult to
remove from toe nails, because toe nails are naturally
more dry and have less natural oils.
Scratch resistance
Unlike solvent-based polishes which reach their maximum
hardness in about 40 minutes, WaterColors Nail Enamel
must be given time to create a tough film. About 75% of
the hardness is achieved very quickly, but it needs 4-6
hours to achieve maximum hardness. The more time you
give it to cure properly, the longer it will wear. You
may choose to apply it at night when the day's
activities are done. However, because the film is quite
thin, worn areas at the tips or scratches can be easily
touched up to create a freshly-applied appearance.
Ease of removal
The film that is formed by the water-based system
becomes more difficult to dissolve as time passes. For
this reason, we recommend you remove the polish at or
before one week of wear the first time you use our
polish. Apply Odorless Polish Remover to the cotton ball
or Honeybee Gardens felt pad. Hold the wetted pad on the
nail for a few seconds, and then proceed to rub the
polish off while applying gentle pressure. Do not scrape
at the nail. It may take a few swipes longer than you're
used to, but the product will come off. People with dry,
ridgy or porous nails may need to work at it a bit
longer. Acetone-based removers will not work because
this is not a solvent-based system. Wash hands with soap
and water thoroughly after removal. If you have
naturally dry skin, you may also want to use a
moisturizer.
Tips and tricks
While WaterColors Nail Enamel may look and act like
traditional solvent-based polish, it does have its
eccentricities. Most of our customers tell us they would
rather have to do an extra step if necessary rather than
use polishes which contain potentially toxic
ingredients. Here are some special instances and ideas
which can help you create the perfect manicure.
1) Dry Nails
We've found that individuals with dry skin and dry nails
tend to have a more difficult time removing our polish.
For those folks, we recommend moisturizing the nails
first before applying polish. Rub a little cuticle oil
(or any good oil like jojoba, sweet almond, olive, etc.)
into nails until the shininess disappears and the oil is
absorbed into the nail. Then polish the nails as usual.
You may want to remove the polish after one week of
wear. Moisturize after removing polish.
2) Cold Temperatures
Since our polish is water-based, it can thicken in cold
temperatures. We recommend storing our polish at normal
room temperature. If polish does thicken, add ONE drop
of water to bottle and shake well. This should return
the polish to normal consistency. If it does not, the
polish had been too cold for too long and needs to be
replaced.
3) Length of Wear
It's rare we ever hear that our polish doesn't last long
enough. However, if you find the polish isn't wearing as
long as expected, the problem probably comes back to
application. We recommend that you try to polish your
nails at night if possible. Though our polish is tack
free in no time, it takes longer to cure at the
molecular level than traditional polish. So the longer
you give it to set up without exposure to water, etc.,
the better it will wear. That being said, everyone wears
polish differently. How long the polish lasts on you
also depends on your body chemistry, daily activities
and environmental exposure. Applying a clear top coat
can extend the wear of polish. We also recommend a base
clear coat under our darker colors such as Vintage
Merlot, Risque and Desire.
4) Removal
The film that is formed by the water-based system
becomes more difficult to dissolve as time passes. For
this reason, we recommend you remove the polish at or
before one week of wear the first time you use our
polish. Apply Honeybee Gardens Odorless Remover to a
cotton ball or remover pad. Hold the wetted cotton ball
on the nail for a few seconds, and then proceed to rub
the polish off while applying gentle pressure. Do not
scrape at the nail. It may take a few swipes longer than
you're used to, but the product will come off. People
with dry, ridgy or porous nails may need to work at it a
bit longer. Acetone-based removers will not work because
this is not a solvent-based system. Wash hands with soap
and water thoroughly after removal. If you have
naturally dry skin, you may also want to use a
moisturizer.
Additional Tips on Using
this Product:
Don't
leave on for more than a week or it may be harder to
remove due to water evaporation. For some, one coat is
well enough. I've had customers say that they prefer
to use the nail polish remover because it's hard to
remove even before a week. Some have used alcohol and
even everclear with success. Everclear is most likely
better than alcohol to be honest. That is what
customers have said.
Some
customers have told us they apply the nail enamel at
night before going to bed, so it has the whole evening
to really set up properly and last longer.
It may be
a good idea to apply a clear coat before applying the
really dark reds. Because they use only rich natural
pigments, some color could be left behind on the nail,
creating a slight pinkish hue. Simply wash with soap
and water, and the hue will fade in a few hours. But a
clear coat may help to avoid this all together.
However, if it makes it hard to take off in the end,
then maybe trying it without would be better.
Touch ups
are easy with WaterColors. Because of the water-based
formula, touch-ups blend right in without leaving that
additional coat line.
A top coat
of clear may make the polish last longer for some. Our
customers say that it lasts so well however, that it
can be more difficult to get off at times. So not
everyone needs a top coat.
CONTAINS:
-
water
-
water-miscible acrylic - a high quality acrylic acid
that blends with water to form a film
-
polyurethane formers and thickeners - soy-based film
formers NOTE: Polyurethanes are formed by reacting a
polyol (an alcohol with more than two reactive
hydroxyl groups per molecule) with a diisocyanate in
the presence of suitable catalysts and additives.
Because a variety of diisocyanates and a wide range of
polyols can be used to produce polyurethane, a broad
spectrum of materials can be produced to meet the
needs of specific applications. And there are over 90
different kinds of polyurethanes. Some diisocyanates
are toxic, like toluene. But others are organic and
plant derived. Ours are soy-derived.
-
non-ionic
soaps - coconut-based surfactants that do not have an
electric charge; they are used to suspend the
colorants in the formulation
-
May
contain: ultramarine blue, carmine, mica, iron oxides,
titanium dioxide or chromium hydroxide.
NOTE: The Romance, Valentine and Hippie Chick contain
titanium dioxide. The polishes that contain Carmine
are: Camelot, Cherokee, Romance, Risque, Desire,
Vintage Merlot
Shades
Available:
 |
 |
 |
 |
 |
 |
 |
 |
 |
Camelot -
shimmery medium ruby red with slight brown undertones
Clear Base/Top Coat -
clear
Cherokee -
matte medium brown with mauve undertones; good neutral
color
Desire -
intense matte brick red with a deep scarlet hue
|
 |
 |
 |
 |
 |
 |
 |
Fairy Dust -
pale sparkling frosty pink
Goddess -
deep frosty plum silver with deep pink undertones
Hippie Chick -
funky matte lavender
Mocha Latte -
creamy pale frosty brown with a silver cast
|
 |
 |
 |
 |
 |
 |
 |
Moulin Rouge -
sultry sparkly ruby fuschia
Risque -
very deep plum berry red; matte
Romance -
matte medium red plum with very slight brown undertones;
good neutral color
San Francisco -
frosty shimmery peachy pink with a silver cast
|
 |
 |
 |
 |
 |
 |
 |
Shiny Penny -
the color of a brand new penny; sparkly copper
Tuscany -
frosty shimmering grape with silvery pink undertones
Valentine -
matte medium soft true pink
Vntage Merlot -
extremely intense very deep red wine
|
|